وظائف الخليج

<p>Carry out preventive, corrective, and breakdown maintenance of plant equipment. Repair, overhaul, install, and dismantle mechanical equipment as required. Maintain pumps, compressors, cooling-water systems, conveyors, HBI machines, and hydraulic systems. Support plant shutdowns, turnarounds, and commissioning activities. Follow HSE, PTW, and LOTO procedures at all times.</p><p><strong>Desired Candidate Profile</strong></p><p>Diploma in Mechanical Engineering with 5 10 years of experience, or ITI/Fitter with 8 12 years. Experience in gas-based DRI plants is preferred. Good knowledge of mechanical equipment maintenance, alignment, pumps, compressors, and hydraulics. Ability to read mechanical drawings and troubleshoot equipment failures.</p>

<p>Participate in mechanical completion inspections, system walk-downs and punch-list identification/closure. Verify equipment and piping installation against approved P&amp;IDs and operating requirements. Support flushing, blowing, hydrotesting, gas leak testing, line checking and equipment functional testing. Participate in commissioning and start-up of gas circuits, process equipment, CO removal systems and associated utilities. Perform field line-ups and equipment preparation for plant start-up, shutdown and maintenance. Operate and inspect field equipment including valves, pumps, compressors, heaters, material-handling systems and associated auxiliaries. Monitor field conditions for abnormal temperature, pressure, vibration, leakage, noise or equipment behaviour. Coordinate field actions with the Panel Operator and Shift In-Charge. Guide and supervise Field Operators during routine and non-routine operational activities. Support equipment isolation and de-isolation under approved PTW and LOTO procedures. Respond effectively to gas leaks, trips, equipment failures and other operational emergencies. Maintain accurate field logs and report abnormalities promptly. Ensure safe handling of natural gas, reducing gases, hydrogen-rich gas and carbon monoxide environments. Contribute to improving operating procedures and field checklists based on commissioning and operating experience.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Chemical/Science or Diploma in Chemical Engineering or equivalent.</li><li>Minimum 5 years' experience for degree holders or 8 years for diploma holders.</li><li>Minimum 2 years as a Senior Field Operator or equivalent.</li><li>Hands-on experience in Tenova HYL/Energiron or Midrex DRI operations.</li><li>Experience in commissioning/start-up of a DRI plant will be a strong advantage.</li><li>Good knowledge of process gas systems, CO removal, PGH, natural-gas systems and plant utilities.</li><li>Strong understanding of PTW, LOTO and gas-safety practices.</li></ul>

<p>Lead instrumentation maintenance activities during the assigned shift. Supervise instrumentation technicians and contractors. Troubleshoot instrumentation and control system issues. Support installation, commissioning, start-up, and shutdown activities. Review P&amp;IDs, loop diagrams, wiring diagrams, datasheets, and other technical documentation. Monitor DCS, PLC, ESD, F&amp;G, and SCADA systems. Coordinate calibration and preventive/corrective maintenance activities. Ensure compliance with plant HSE procedures and maintenance standards.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor s Degree in Instrumentation/Electronics Engineering with 5 8 years of relevant experience; OR Diploma in Instrumentation Engineering with 8 12 years of relevant experience.</li><li>Minimum 5 years of experience with MIDREX or HYL/ENERGIRON technology.</li><li>Strong knowledge of DCS, PLC, instrumentation calibration, and troubleshooting.</li><li>Experience with ESD, F&amp;G, and SCADA systems.</li><li>Previous commissioning, start-up, shutdown, and maintenance exposure.</li><li>Previous team/shift leadership experience is preferred.</li><li>SAP exposure is an advantage.</li><li>Good English communication skills.</li></ul>

<p>Manage instrumentation and control activities across the DRI Plant. Support installation, testing, commissioning, start-up, and maintenance activities. Review P&amp;IDs, instrumentation datasheets, control system architecture, and technical drawings. Support FAT, SAT, testing, and performance verification activities. Monitor and troubleshoot DCS, PLC, SIS/ESD, and SCADA systems. Coordinate with technology licensors, vendors, EPC contractors, and internal teams. Support preventive and corrective maintenance activities. Lead and support instrumentation engineers, supervisors, and technicians. Ensure compliance with applicable HSE and technical standards.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s Degree in Instrumentation, Electronics, Electrical &amp; Instrumentation Engineering, or a related discipline with 10 15 years of relevant experience; OR Diploma in Instrumentation Engineering with 12 18 years of relevant experience. Minimum 8 years of experience with MIDREX or HYL/ENERGIRON technology. Strong knowledge of DCS and PLC systems. Experience with SIS/ESD, SCADA, and industrial control systems. Exposure to Siemens PCS 7 is highly preferred. Knowledge of SAP PM/MM, HART, Modbus, HAZOP, and SIL is an advantage. Strong commissioning, start-up, maintenance, and troubleshooting experience. Good English communication skills.</p>

<p>Oversee and manage all activities related to electrical systems, equipment, and processes within approved budget as well as provide technical leadership contribution and excellence in the field of electrical engineering and in compliance with the design code, HSSE level of integrity and reliability and legal requirements to ensure the safety and integrity of the electrical systems of OLNG.</p><p><strong>Managerial Responsibilities</strong></p><p>Drive seamless communication between senior leadership, team members, and other departments to ensure smooth flow of information and timely decision making</p><p>Build a strong team culture by fostering a positive and productive work environment and ensuring that the staff is motivated and collaborative</p><p>Set clear goals and expectations for team members, regularly assess their performance against the set goals, and provide constructive feedback for continuous improvement</p><p>Conduct regular check ins with team members for alignment on expectations and performance</p><p>Lead the electrical engineering team and ensure effective and efficient utilization of resources to achieve departmental objectives</p><p>Guide and support team members on all operational and functional matters and resolve any doubts/concerns/grievances they have</p><p>Devote time to train team members on new ways of working, developing new competencies, and upskilling to drive performance and productivity</p><p><strong>Electrical Engineering Strategic Planning and Budgeting:</strong></p><p>Develop departmental strategies in alignment with the corporate strategy and ensure the delivery of business results is aligned to the corporate objectives</p><p>Develop and maintain the long-term strategic plan for the engineering discipline activities in the Asset Reference Plan, and ensure alignment with production, maintenance, and projects for delivery</p><p>Develop optimum Capex &amp; Opex budget for all electrical activities considering the future requirements and forecast expenditure to ensure sufficient funds and resources are available</p><p><strong>Electrical Engineering Project &amp; Operations:</strong></p><p>Lead electrical engineering activities for capital projects, plant expansions, and brownfield modifications from concept selection through commissioning and start-up.</p><p>Manage electrical project interfaces, technical evaluations, vendor selection, FAT/SAT, and contractor performance to ensure safe and efficient project delivery.</p><p>Develop and manage the delivery of technical excellence within all the electrical engineering activities to develop and strengthen assurance processes to ensure uninterrupted plant operation</p><p>Recommend best practices related to operation and maintenance of the electrical systems and equipment, oversee the maintenance, and ensure perennial availability of electrical spare parts</p><p>Conduct regular electrical spare parts reviews and follow up on action items that ensure availability of required spares to maintain complex electrical equipment</p><p>Propose and initiate new contracts for major electrical maintenance &amp; projects and carry out technical evaluation</p><p>Guide the team on complex investigations and provide expert guidance to resolve technical challenges with maintenance and projects delivery</p><p>Direct the team in technical studies and failure investigations, electrical SAFOP and all related elements, with base knowledge in process and instrument diagram reviews, Safety Integrity Level (SIL) assessments and HAZOP s etc.</p><p>Own the electrical engineering as deputy subject matter expert (SME) and act as the definitive source of knowledge, technique, and expertise to provide professional and technical insight for electrical design, engineering, and trouble-shooting activities</p><p>Control the additions to the high voltage network imposed by the complex expansion</p><p><strong>Quality and Assurance Management:</strong></p><p>Ensure technical quality of all the electrical activities within the department</p><p>Develop and maintain robust assurance functions within procedures to ensure risk profile in relevant business scope is identified, monitored, and controlled</p><p>Liaise with the area managers within maintenance and turnarounds to develop and strengthen assurance processes to ensure uninterrupted plant operation</p><p>Ensure that all the electrical discipline procedures are in accordance with the ISO certified quality assurance system</p><p>Oversee departmental activities and ensure HSSE and regulatory compliance to provide leadership support to achieve goal zero for the OLNG organisation</p><p><strong>Management of Electrical Engineering Contracts:</strong></p><p>Support EPE in strategizing major electrical engineering contracts from inception, contract strategy, technical evaluation, contractor evaluation to selection</p><p>Ensure delivery of major contracts and contractual compliance with regards to budgets, safety and quality and timelines</p><p><strong>Stakeholder Management and Continuous Improvement:</strong></p><p>Develop and maintain cordial relationships with a variety of internal and external stakeholders with the highest standards of business ethics</p><p>Promote and foster technical innovation, acquisition of expertise and a continuous improvement culture by constantly seeking new technical developments and actively pursuing deployment opportunities in a manner that positively contributes to the core values and the policies of OLNG.</p><p>Act as the Technical Authority TA3 for asset and projects</p><p><strong>Desired Candidate Profile</strong></p><ul><li>10 years in chemical or oil and gas industry</li><li>Omani Nationals Preferred</li><li>5 years of experience of troubleshooting, analysis of electrical networks and equipment which includes generation, distribution, and transmissions systems up to 33kV levels and HV motors and associated controls such as power management system, SCADA (System Control and Data Acquisition), Load Shedding, VSDS controllers and cryogenic equipment</li><li>Knowledge of hazardous area classification, DEP, &amp; IEC standards</li><li>Technical Authority Level3</li><li>Demonstrated experience in the execution, engineering, construction, commissioning, or management of major industrial projects, preferably within the Oil &amp; Gas, LNG, or energy sector</li></ul>

<p>Oversee and manage all activities related to maintenance of the rotating equipment including - developing QA/QC protocols and procedures for preventive and corrective maintenance by delivering technical excellence and leadership to ensure that the technical integrity of the rotating equipment is maintained.</p><p><strong>MANAGERIAL RESPONSIBILITIES</strong></p><ul><li>Drive seamless communication between senior leadership, team members, and other departments to ensure smooth flow of information and timely decision making</li><li>Build a strong team culture by fostering a positive and productive work environment and ensuring that the staff is motivated and collaborative</li><li>Set clear goals and expectations for team members, regularly assess their performance against the set goals, and provide constructive feedback for continuous improvement</li><li>Conduct regular check ins with team members for alignment on expectations and performance</li><li>Lead the rotating equipment team and ensure effective and efficient utilization of resources to achieve departmental objectives</li><li>Guide and support team members on all operational and functional matters and resolve any doubts/concerns/grievances they have</li><li>Devote time to train team members on new ways of working, developing new competencies, and upskilling to drive performance and productivity</li></ul><p><strong>FUNCTIONAL RESPONSIBILITIES</strong></p><p><strong>Rotating Equipment Strategic Planning and Budgeting:</strong></p><ul><li>Develop departmental strategies in alignment with the corporate strategy and ensure alignment of the delivery of business results to the corporate objectives</li><li>Develop and maintain the long-term strategic plan for the engineering discipline activities in the Asset Reference Plan, and ensure alignment with production, maintenance, and projects for delivery</li><li>Develop optimum Capex &amp; Opex budget for all rotating equipment engineering activities considering the future requirements and forecast expenditure to ensure sufficient funds and resources are available at all times</li></ul><p><strong>Project, Operation, and Maintenance of Rotating Equipment:</strong></p><ul><li>Lead Rotating engineering activities for capital projects, plant expansions, and brownfield modifications from concept selection through commissioning and start-up.</li><li>Manage Rotating project interfaces, technical evaluations, vendor selection, FAT/SAT, and contractor performance to ensure safe and efficient project delivery.</li><li>Develop and manage the delivery of technical excellence within rotating equipment engineering</li><li>Recommend best practices related to operation and maintenance of the rotating equipment</li><li>Guide the team on complex investigations and provide expert guidance to resolve technical challenges with maintenance and projects delivery</li><li>Propose and initiate reliability and safety improvement projects in coordination with reliability teams</li><li>Direct the team in technical studies and failure investigations, Process and Instrument Diagram Reviews, Safety Integrity Level (SIL) assessments and HAZOP s etc.</li><li>Act as a deputy subject matter expert (SME) for rotating equipment engineering and act as the definitive source of knowledge, technique, and expertise to provide professional and technical insight for electrical design, engineering, and trouble-shooting activities</li></ul><p><strong>Management of Spare Parts:</strong></p><ul><li>Manage and control the inventory of materials and spare parts, ensure that spare parts and material purchase orders have been prepared and updated in time on SAP and the materials are supplied well in advance of the scheduled execution</li><li>Identify spare parts and consumables requirements for rotating equipment, and submit Material Master requests for the same, as and when required</li><li>Ensure that the handling procedures are in place for all equipment (capitalized insurance spares, special tools etc.) to be handled with care to ensure its integrity and long service life</li></ul><p><strong>Quality and Assurance Management:</strong></p><ul><li>Ensure technical quality of all the rotating equipment engineering activities within the department</li><li>Ensure that the rotating equipment meet the required standards set per code or OEM or Industry best practices by regular or surprise inspections</li><li>Develop and maintain robust assurance functions within procedures to ensure risk profile in relevant business scope is identified, monitored, and controlled</li><li>Liaise with relevant area managers within production, maintenance, projects, and technology to develop and strengthen assurance processes to ensure uninterrupted plant operation</li><li>Oversee departmental activities and ensure HSSE and regulatory compliance</li></ul><p><strong>Vendor Management and Engineering Contracts:</strong></p><ul><li>Liaise with vendors as part of long-term service contracts, ensure contract terms and conditions are fulfilled</li><li>Support ENR in strategizing major engineering contracts from inception, contract strategy, contractor evaluation to selection</li><li>Ensure delivery of major contracts and contractual compliance with regards to budgets, safety and quality and timelines</li></ul><p><strong>Stakeholder Management and Continuous Improvement:</strong></p><ul><li>Develop and maintain cordial relationships with a variety of internal and external stakeholders with the highest standards of business ethics</li><li>Promote and foster technical innovation, acquisition of expertise and a continuous improvement culture by constantly seeking new technical developments and actively pursuing deployment opportunities</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Degree in Mechanical Engineering or Equivalent</p><p>10 years of rotating equipment experience in LNG or Oil and Gas industry</p><p>Technical Authority Level3</p><p>Demonstrated experience in the execution, engineering, construction, commissioning, or management of major industrial projects, preferably within the Oil &amp; Gas, LNG, or energy sector</p>

<p><br></p><p><strong>MANAGERIAL RESPONSIBILITIES:</strong></p><ul><li>Create a strategic plan of action for the Rotating Equipment Engineering Services to achieve the goal of zero incidents at the Qalhat LNG Complex for project phase, including adoption of best practices from the industry and budget allocations.</li><li>Build, coach, and performance manage the rotating equipment team; develop succession and capability.</li><li>Manage interfaces with owners, EPC/EPCM, OEMs, utilities/authorities, insurers, and operations/maintenance.</li><li>Provide executive level reporting and decision support.</li><li>Set clear goals and expectations for team members, regularly assess their performance against the set goals, and provide constructive feedback for continuous improvement</li><li>Devote time to train team members on new ways of working, developing new competencies, and upskilling to drive performance and productivity</li></ul><p><strong>FUNCTIONAL RESPONSIBILITIES:</strong></p><p><strong>Projects/Asset Management and Delivery:</strong></p><ul><li>Oversee concept/FEED, detailed design, and interdisciplinary interfaces (civil/structural, mechanical, I&amp;C, telecoms).</li><li>Validate vendor data/OEM integration; ensure operability, maintainability, and reliability targets.</li><li>Design the rotating equipment equipment, rotating equipment distribution and generation system in accordance with HSSE standards, OLNG standards and other regulatory requirements.</li><li>Acts as the subject matter expert (SME) definitive source of knowledge, technique, and expertise within his/her area to provide professional and technical insight for design, engineering and/or complex trouble-shooting activities.</li><li>Mastery Specialist skills on a selected equipment is desirable.</li><li>Skills in load flow system studies, fault level calculations &amp; rotating equipment protection relay grading</li><li>Provide comprehensive support and expertise in technical studies for Rotating Equipment, and all associated components, including proficiency in Process and Instrument Diagram reviews, Safety Integrity Level (SIL) assessments, and HAZOP analyses.</li><li>Well-versed in international codes, standards, and practices for oil and gas EPC projects.</li><li>Oversee troubleshooting for all rotating equipment process incidents that may impact plant reliability and availability, utilising appropriate methodologies such as Root Cause Analysis (RCA) and Tripod as required.</li><li>Ensure complete as built, spares, O&amp;M manuals, training, and warranty plans.</li><li>Achieve performance tests and reliability run per contract, support RAM targets.</li></ul><p><strong>Strategic Planning of Departmental activities:</strong></p><ul><li>Establishes and applies best practices within their area of expertise, leading teams through complex investigations and offering innovative, expert guidance in Rotating Equipment Engineering to effectively address technical issues encountered during maintenance and project execution.</li><li>Define rotating equipment execution strategy, contracting model, and phasing; align with project execution plan (PEP) and governance.</li><li>Establish design basis, standards, and assurance gates for the rotating equipment scope.</li><li>Chair rotating equipment risk reviews, design reviews (rotating equipment), and rotating equipment readiness reviews (MC/Pre Comm/Comm/OR).</li><li>Accountable for ensuring the technical quality of every aspect of Rotating Equipment Engineering projects, including developing and upholding assurance processes across procedures, organizational structure, other business units, staff, and corporate functions to effectively identify, monitor, and manage risks within the relevant business scope.</li><li>Accountable for establishing and sustaining discipline engineering assurance functions, offering advanced specialist technical expertise to support other departments.</li><li>Accountable for developing and implementing the long-term strategic plan for engineering discipline activities within the Asset Reference Plan, ensuring alignment with production, maintenance, and project objectives to achieve effective delivery.</li></ul><p><strong>Stakeholder Management:</strong></p><ul><li>Serve as the primary senior company interface for the client on all rotating equipment matters.</li><li>Manage strategic relationships with joint venture partners, key vendors, and regulatory bodies.</li><li>Experience to manage CONTRACTORS &amp; Project deliverables for owner is distinctly preferred.</li><li>Negotiate settlement of major claims and variations related to rotating equipment scope.</li><li>Builds and sustains productive partnerships with a diverse range of stakeholders such as area maintenance managers, turnaround managers, project managers, and senior leadership.</li><li>This position requires dynamic involvement in several workgroups simultaneously, ensuring information is shared effectively throughout the organization.</li><li>Foster technical innovation and ongoing improvement by seeking new developments, deploying opportunities, and engaging with leadership in line with OLNG s core values and policies.</li><li>Accountable for fostering and sustaining organisational alignment to achieve business objectives within the relevant discipline, while ensuring overall consistency with corporate goals.</li></ul><p><strong>Management of Engineering Contracts:</strong></p><ul><li>Establish technical requisition requirements and evaluation criteria; provide leadership in Technical Bid Evaluation (TBE) and vendor selection for Rotating Equipment.</li><li>Manage rotating equipment change orders, claims avoidance/defence, and commercial exposure for rotating equipment packages.</li><li>Initiate new contracts for Major Rotating Equipment Maintenance &amp; Projects and carry out technical evaluation.</li><li>Responsible for planning major engineering contracts from the beginning, including developing contract strategies, evaluating and choosing contractors.</li><li>Also ensures that significant contracts are delivered on time, within budget, and in compliance with safety, quality, and contractual requirements.</li></ul><p><strong>Quality Assurance:</strong></p><ul><li>Drive zero harm culture; ensure compliance with rotating equipment safety standards (e.g. DEP, where applicable).</li><li>Ensure design and construction adhere to applicable codes, environmental and regulatory permits.</li><li>Own rotating equipment QA/QC plan, ITPs, and non conformance management.</li><li>Accountable that all the rotating equipment discipline procedures within an ISO certified quality assurance system.</li><li>Accountable in setting the requirement of regular rotating equipment spare parts.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>BSc in Mechanical Engineering or Equivalent. Minimum of 12 years relevant oil and gas industry experience with 8 10+ years in large industrial/ O&amp;G projects with LNG experience 5+ years in leadership of multi disciplinary rotating equipment teams; track record of first time right energization. Technical Authority Level 2 (TA-2) Minimum 4+ years of experience in troubleshooting, analysis of Rotating Equipment Technical Authority Level3 Demonstrated experience in the execution, engineering, construction, commissioning, or management of major industrial projects, preferably within the Oil &amp; Gas, LNG, or energy sector</p>

<p>We are hiring an experienced Restaurant Captain for a reputed restaurant group in Oman . The ideal candidate should have a minimum of 3 years of experience in the Hotel, restaurant, or Hospitality industry and should have good knowledge of restaurant operations, customer service and team supervision.</p><p><b><br></b></p><p><b>Key Responsibilities</b></p><ul><li>Supervise daily restaurant service operations and ensure smooth functioning.</li><li>Lead and coordinate restaurant service staff during shifts.</li><li>Ensure excellent customer service and guest satisfaction.</li><li>Take and coordinate customer orders accurately and efficiently.</li><li>Coordinate with the kitchen and service team to ensure timely food delivery.</li><li>Handle guest queries, requests and service-related complaints professionally.</li><li>Monitor table setup, cleanliness and overall restaurant presentation.</li><li>Ensure staff follow hygiene, safety and service standards.</li><li>Allocate duties to service staff and monitor their performance.</li><li>Assist the Restaurant Manager in maintaining smooth day-to-day operations.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Minimum 3+ years of relevant experience in Hotels, restaurants, or the Hospitality industry.</p><p>Candidates with experience as Restaurant Captain, F&amp;B Captain, Restaurant Supervisor or similar roles are preferred.</p><p>Good communication and interpersonal skills.</p><p>Strong customer service and guest-handling skills.</p><p>Ability to manage and supervise a team.</p><p>Knowledge of restaurant service procedures and standards.</p><p>Candidates willing to work in Oman.</p><p>Immediate joiners/candidates available for immediate departure are preferred.</p><p>Documents Required</p><p>Candidates should be ready to provide:</p><ul><li>Updated CV with photograph</li><li>Educational certificates</li><li>Experience certificates</li><li>Passport front and last page copies</li><li>Recent white-background photograph</li><li>COVID vaccination certificate</li></ul>

<p>Identify and pursue new sales opportunities within the medical supplies market. Develop and maintain relationships with hospitals, clinics, pharmacies, and distributors. Achieve monthly and quarterly sales targets as set by the management. Prepare and present quotations, proposals, and tenders to potential clients. Provide excellent customer service and maintain long-term client relationships. Follow up on inquiries, quotations, and orders to ensure timely execution. Handle customer complaints professionally and ensure prompt resolution. Gather market intelligence on competitors, pricing trends, and customer needs. Provide regular feedback to management regarding market conditions and opportunities. Ensure all sales activities comply with company policies and relevant medical regulations. Uphold the professional image and reputation of the company in all customer interactions.</p><p><strong>Desired Candidate Profile</strong></p><p>Skills Strong communication Negotiation interpersonal skills Time Management Requirement Bachelors Degree in relevant field preferred. GCC Experience preferred. Valid Oman driving license (mandatory). 2-3 years of sales experience in medical industry preferred.</p>

<p>Responsible in measuring, re-measurements and reporting on quantities of the Work following the Contract qualifications. Responsible for measuring all the construction activities and quantities as well as utilized Materials, Labor, Plant &amp; Equipment. Responsible for the final account preparation. Responsible for the final Cost Estimate used for validation and calibration of Purchase Orders. Responsible for actual recordings of the original BoQ and Changes. Responsible for the review of the BoQ and MTO or BOM at any Design and Engineering phase.</p><p><strong>Desired Candidate Profile</strong></p><p>Degree/Diploma in Technical Engineering (Preferably Mechanical) with Minimum 5 years experience in Quantity Surveying in a major Construction environment.</p>

<p>MEP Technician for Oman Company</p><p><strong>Desired Candidate Profile</strong></p><p>MEP Technician Exp. in Mechanical, Plumbing, Electrical work Exp. in BMS &amp; Facility Mgmt</p>

<p>Construct and install wooden/plywood formwork for columns, beams, slabs, walls, and foundations. Read and follow construction drawings, measurements, and site instructions. Cut, shape, assemble, and install timber and plywood according to required dimensions. Ensure formwork is properly aligned, levelled, supported, and secured before concrete pouring. Dismantle and remove formwork safely after concrete has sufficiently set. Carry out carpentry repairs, adjustments, and modification work at the construction site. Use carpentry hand tools and power tools safely and efficiently. Coordinate with steel fixers, masons, supervisors, and other site workers. Maintain proper quality and accuracy of carpentry work. Follow construction-site safety procedures and wear required PPE. Keep tools, materials, and work areas clean and organized.</p><p><strong>Desired Candidate Profile</strong></p><p>Education: 10th / 12th Pass / Any Graduate can be considered. Experience: Preferably 2 5+ years of relevant construction carpentry experience . Candidates with GCC/Oman construction experience will be preferred. Experience in shuttering/formwork carpentry is an advantage. ITI/Diploma in Carpentry or related trade is preferred but not mandatory . Must be able to understand measurements and basic construction drawings. Should be physically fit and comfortable working at construction sites and heights. Hardworking, disciplined, and able to work as part of a team.</p>

<p>Conduct quality control inspections of welds, materials, and equipment in accordance with Aramco's standards and specifications. Identify defects or non-conformities and recommend corrective actions to ensure compliance with QA/QC requirements. Collaborate with production teams to resolve issues related to welding processes, material selection, and fabrication techniques. Develop and maintain documentation for inspection records, reports, and certifications.</p><p><strong>Desired Candidate Profile</strong></p><p>5-10 years of experience in oil &amp; gas industry as an EI (Engineering Inspection) QC Inspector or similar role. Strong knowledge of QA/QC principles, practices, and procedures in the petrochemical sector. Proficiency in PDO (Petroleum Development Overseas) standards and regulations applicable to oil &amp; gas projects. Experience with welding inspection methods, including visual examination, testing, and documentation.</p>

<p>Perform servicing, maintenance, and repairs of diesel engines and heavy vehicles/equipment. Diagnose and troubleshoot mechanical, electrical, hydraulic, and engine-related faults. Carry out preventive and breakdown maintenance to minimize equipment downtime. Inspect engines, transmissions, brakes, cooling, fuel, and hydraulic systems. Repair or replace defective mechanical components, parts, and assemblies. Perform engine servicing, tuning, overhauling, and routine inspections. Maintain heavy equipment and vehicles in safe and proper operating condition. Use appropriate tools and diagnostic equipment for fault finding and repairs. Maintain maintenance records and report major faults to the supervisor. Follow workshop/site safety procedures and use required PPE.</p><p><strong>Desired Candidate Profile</strong></p><p>Education: Any Graduate / 12th Pass / 10th Pass all can be considered. Experience: Preferably 2 5+ years of relevant Diesel Mechanic experience . Candidates with experience in heavy vehicles, trucks, buses, construction equipment, generators, or industrial machinery preferred. Practical knowledge of diesel engine repair and maintenance is essential. GCC/Oman experience will be an advantage. ITI/Diploma in Diesel/Automobile/Mechanical trade is preferred but not mandatory if the candidate has strong practical experience. Must have good troubleshooting and problem-solving ability. Should be physically fit and willing to work at workshops/construction/industrial sites.</p>

<p>Perform preventive &amp; corrective maintenance of Instrumentation and E&amp;I systems . Calibrate, test and troubleshoot pressure, level, flow &amp; temperature instruments . Troubleshoot PLC, SCADA, VFDs, sensors and encoders . Work with Siemens PLC, WEG VFD, Profibus, Profinet &amp; Modbus . Maintain Fire &amp; Gas systems and CO, SO &amp; H detectors . Read P&amp;IDs, wiring diagrams and instrument datasheets . Maintain maintenance/calibration records and follow HSE &amp; PTW procedures .</p><p><strong>Desired Candidate Profile</strong></p><p>Diploma in Instrumentation/E&amp;I: 57 years experience OR ITI Electrician: 7 9 years E&amp;I experience. Experience in Port, Plant, Oil &amp; Gas, Refinery, Petrochemical or Heavy Industry . Strong hands-on experience in instrumentation maintenance, calibration &amp; troubleshooting . Knowledge of PLC, SCADA, VFD and Fire &amp; Gas systems . Port/Bulk Handling experience preferred . Good communication and problem-solving skills. Interested candidates can apply with their updated CV.</p>

<p>Plan, design and supervise civil engineering projects including roads ,bridges, buildings, drainage, water supply and other infrastructure</p>

<p>Position: E&amp;I Shift In-Charge</p><p>We are looking for an experienced E&amp;I Shift In-Charge to manage the operation, maintenance and troubleshooting of electrical and instrumentation systems in a bulk material handling/port environment.</p><p>Key Responsibilities:</p><ul><li>Manage preventive, predictive and corrective maintenance of electrical and instrumentation systems.</li><li>Handle operation, maintenance and troubleshooting of 11kV/440V substations with SCADA control.</li><li>Troubleshoot Siemens S7 PLC/DCS, SCADA, VFDs and industrial drives.</li><li>Handle maintenance, calibration and troubleshooting of field instruments, transmitters and flowmeters.</li><li>Handle F&amp;G, FACP and CACP systems.</li><li>Supervise maintenance teams during shutdowns, breakdowns and emergency maintenance.</li><li>Troubleshoot stackers, reclaimers, conveyors, wagon loaders, silos and ship loaders.</li><li>Maintain SAP work orders, maintenance records and calibration reports.</li><li>Coordinate with operations and control-room teams to ensure smooth equipment performance.</li><li>Ensure compliance with HSE procedures, PTW, risk assessments and safety standards.</li><li>Support maintenance planning, spare parts management and technical procurement.</li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Required Qualifications &amp; Experience:</strong></p><ul><li>B.E./B.Tech in Electrical &amp; Electronics/Electrical Engineering with 7 10 years of relevant experience, OR Diploma in Electrical &amp; Electronics/Instrumentation with 10 13 years of relevant experience.</li><li>Experience in Electrical &amp; Instrumentation maintenance, automation and industrial/port environments.</li><li>Hands-on experience with PLCs, SCADA, VFDs, substations and field instrumentation.</li><li>Knowledge of Profibus, Profinet and Modbus is preferred.</li><li>Experience with bulk material handling equipment such as stackers, reclaimers, conveyors and ship loaders is highly preferred.</li></ul><p><strong>Preferred Industry:</strong> Ports, Bulk Material Handling, Mining, Cement, Steel, Power Plant or Heavy Industrial Maintenance.</p>

<p>Role &amp; responsibilities Cut, bend, and fix reinforcement steel as per structural drawings and specifications. Install reinforcement bars for foundations, columns, beams, slabs, walls, and other RCC structures. Tie reinforcement using binding wire and ensure proper spacing and alignment. Check bar sizes, lap lengths, cover, and positioning before concrete pouring. Assist in unloading, shifting, and arranging reinforcement steel at the worksite. Use steel-fixing tools and equipment safely and correctly. Coordinate with supervisors, carpenters, masons, and other construction workers. Maintain quality standards and follow project specifications. Follow all site safety procedures and use required PPE. Keep the work area clean and organized.</p><p><strong>Desired Candidate Profile</strong></p><p>Experience: 2 to 5 years of relevant experience as a Steel Fixer/Rebar Fixer. Industry: Construction, infrastructure, civil works, or building projects. Candidates with GCC experience will be preferred. Must have good knowledge of reinforcement work and RCC construction. Should be physically fit and willing to work in outdoor/site conditions. Should be disciplined, hardworking, and able to follow instructions.</p>

<p>Perform TIG and MIG/MAG welding as per project specifications and required welding procedures. Weld and fabricate components made from mild steel, carbon steel, stainless steel and aluminium as required. Read and understand technical drawings, fabrication drawings, dimensions, and welding symbols. Prepare, fit, align, and tack-weld components before final welding. Set up welding machines and select appropriate welding parameters, gases, electrodes, and consumables. Perform welding in required positions, including horizontal, vertical and overhead positions. Inspect welds for proper penetration, alignment, appearance, and defects. Identify and rectify welding defects such as porosity, cracks, undercut, and lack of fusion. Carry out grinding, cutting, cleaning, and finishing of welded components. Maintain welding machines, tools, and equipment in proper working condition. Follow project quality standards, approved welding procedures, and safety requirements. Use appropriate PPE and maintain a clean and safe work area.</p><p><strong>Desired Candidate Profile</strong></p><p>Education: 10th / 12th Pass / ITI / Diploma depending on employer requirement.</p><p>Experience: Preferably 25+ years of relevant TIG/MIG welding experience . Candidates with GCC experience , particularly Oman/UAE , will be preferred. Experience in fabrication, construction, manufacturing, structural steel, piping, or industrial projects is an advantage. ITI/technical certification in Welding, Fabrication, or Mechanical Trade preferred. Candidates with 6G/3G/4G welding certification may be preferred for specialized positions. Ability to read technical/fabrication drawings and welding symbols . Should be able to pass a practical welding test if required by the employer. Must be physically fit and comfortable working in workshops, construction sites, and industrial environments. Good hand-eye coordination, attention to detail, discipline, and teamwork.</p>

<ul><li>Design and deliver engaging IT training programs, ensuring alignment with business objectives and skill gaps.</li><li>Assess training needs through consultations, surveys, and performance analysis, tailoring content for maximum impact.</li><li>Develop comprehensive training materials, including manuals, presentations, and online modules, using various learning platforms.</li><li>Conduct hands-on training sessions, workshops, and webinars, fostering a dynamic and interactive learning environment.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's degree in Computer Science, Information Technology, or a related field is preferred.</p></li><li><p>Possess relevant certifications, such as CompTIA, Microsoft Certified Trainer (MCT), or similar.</p></li><li><p>Minimum of 3-5 years of experience in IT training or a related role, demonstrating a track record of success.</p></li><li><p>Proven experience working in the technology sector, with a deep understanding of IT concepts and systems.<br>Proficient in English & Arabic language.</p></li></ul>