الوصف الوظيفي
ملخص الدور: مسؤول عن تنفيذ عمليات فحص الجودة وأنشطة الاختبار في ورش التصنيع ومواقع المشاريع، مع ضمان الامتثال للرسومات المعتمدة ومواصفات المشروع ومعايير الجودة والأكواد الدولية.
يركز الدور على الحفاظ على جودة المنتج، ومنع إعادة العمل والرفض، وضمان اكتمال جميع وثائق الفحص والجودة بدقة.
المسؤوليات الرئيسية: مراجعة الرسومات الهندسية وأوامر الشراء والمواصفات وخطط الفحص والاختبار (ITPs).
إجراء عمليات فحص المواد الواردة، بما في ذلك المواد الموردة من قبل العميل.
إجراء عمليات الفحص أثناء العملية والنهائية، بما في ذلك فحص اللحام، والاختبارات غير التدميرية (NDE/NDT)، وفحص الطلاء.
مراقبة الامتثال لمواصفات إجراءات اللحام (WPS) ومؤهلات اللحامين.
التنسيق مع وكالات الفحص التابعة لطرف ثالث فيما يخص الاختبارات غير التدميرية وأنشطة الفحص الأخرى.
إعداد ومراجعة ومتابعة تقارير عدم المطابقة (NCRs).
تنسيق معايرة معدات الفحص والقياس والاختبار (IMTE) والاحتفاظ بالسجلات.
إعداد تقارير الفحص اليومية وتجميع وثائق الجودة.
إجراء عمليات فحص الموردين عند الحاجة.
المشاركة في عمليات التدقيق الداخلي لنظام الإدارة المتكامل (IMS) والتنسيق مع مدققي نظام الإدارة المتكامل.
ضمان الامتثال لمعايير الجودة المعمول بها ومتطلبات المشروع والأكواد الدولية.
أداء مهام أخرى يكلفه بها مهندس ضبط الجودة أو مشرف ضبط جودة المشروع.
المؤهلات والمهارات والخبرة: دبلوم أو درجة البكالوريوس في الهندسة الميكانيكية أو العلوم.
يفضل الحصول على شهادة ASNT المستوى الثاني في الفحص بالموجات فوق الصوتية (UT)، والتصوير الإشعاعي (RT)، والاختبار بالصبغ السائل (PT)، والاختبار بالجسيمات المغناطيسية (MT)، والفحص البصري (VT).
يفضل الحصول على شهادة AWS-CWI أو CSWIP 3.1.
تعتبر شهادة مدقق جودة داخلي ميزة إضافية.
خبرة ذات صلة تتراوح بين 5 إلى 7 سنوات، مع خبرة لا تقل عن 3 سنوات في دول مجلس التعاون الخليجي.
خبرة في تصنيع الأنابيب وأوعية الضغط والمبادلات الحرارية والغلايات أو أعمال الصيانة أثناء التوقفات.
معرفة بالمعايير والأكواد الدولية، بما في ذلك ASME وASTM وTEMA وAPI وDIN وJIS وANSI وBS 5500.
فهم جيد لإجراءات اللحام، ومؤهلات اللحامين، والاختبارات غير التدميرية (NDE)، ووثائق ضبط الجودة.
Job description
Role Summary Responsible for carrying out quality inspections and testing activities across fabrication shops and project sites, ensuring compliance with approved drawings, project specifications, quality standards, and international codes.
The role focuses on maintaining product quality, preventing rework and rejection, and ensuring all inspection and quality documentation is completed accurately.
Key Responsibilities Review engineering drawings, purchase orders, specifications, and Inspection & Test Plans (ITPs).
Conduct incoming material inspections, including customer-supplied materials.
Perform in-process and final inspections, including welding, NDE/NDT, and coating inspections.
Monitor compliance with Welding Procedure Specifications (WPS) and welder qualifications.
Coordinate with third-party inspection agencies for NDE and other inspection activities.
Prepare, review, and follow up on Non-Conformance Reports (NCRs).
Coordinate calibration of Inspection, Measuring and Test Equipment (IMTE) and maintain records.
Prepare daily inspection reports and compile quality documentation.
Conduct supplier inspections when required.
Participate in internal IMS audits and coordinate with IMS auditors.
Ensure compliance with applicable quality standards, project requirements, and international codes.
Perform other duties assigned by the QC Engineer or Project QC Superintendent.
Qualifications, Skills & Experience Diploma or Bachelor's Degree in Mechanical Engineering or Science.
ASNT Level II certification in UT, RT, PT, MT, and VT is preferred.
AWS-CWI or CSWIP 3.
1 certification is preferred.
Internal Quality Auditor certification is an advantage.
5–7 years of relevant experience with minimum 3 years of experience in GCC Experience in piping, pressure vessels, heat exchangers, and boilers fabrication or shutdown maintenance.
Knowledge of international standards and codes, including ASME, ASTM, TEMA, API, DIN, JIS, ANSI, and BS 5500.
Good understanding of welding procedures, welder qualifications, NDE, and QC documentation.